Advanced design sheet corona treatment device for printing
STD Series Sheet Corona Treatment System
1. Supporting stuffing shutdown; 2. Ozone produced by treatment is discharged by high-pressure fan to ensure the health of operators; 3. Conductive and non-conductive materials can be treated; 4. Frequency conversion control motor, stable speed, low power consumption;
≤2-35 m / min
0.15-1.5mm (the thickest hollow plate made to order 4-10mm)
Suited treated materialsNon conductive sheet metal Sheet
1.Aluminium Foil Telescopic Ventilating Pipe 2.Axial flow fan3.Selective Breeding: The high temperatureresistant conveyor belt can be used forprocessing the sheet with 0. 1mm thicknesswhich is suitable for sheet material withoutcausing the bending of the thin film
The price only the reference price,we can make it according to customer's request.
Feature: 1.Support card material shut down. 2.The ozone produced by the treatment is discharged by the high pressure air blower,guarantee the operator’s health. 3.Can deal with conductive and non conductive materials. 4.Variable frequency control motor,stable speed,low power consumption. Using:All kinds of plastic,metal materials.
Configure customized according to customer's request.
Applied in industries of plastic film blowing,printing,lamination,glue coating,coating cloth,digits jetting,paint spraying,suitable for all kinds of plastic film (such as PP,PE,PETP,OPP,PS,PA.etc),aluminum foil,aluminum film plating paper and fiber.
1.The power supply for eliminating devices is 220 AC per hour. 380 V are strictly prohibited. Wiring shall be used when used end reliably with machine metal body and ground connection otherwise easy damage eliminator.
2.The grounding end of discharge rod must be grounded reliably and electro-acupuncture must be perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
3.When machine works, operator must not contact or close to high voltage output end-point electro acupuncture.
4.High voltage output lines shall be separated from ground lines and cannot be near any metal.
5.When cleaning maintenance, you must cut off power.
6.Discharge body and fixed bracket should be often cleaned with gasoline.
7.During transportation storage and use no two leaching or contacting corrosive objects shall be
8.In use, if sparks are detected or no spark output is found, typically 630 VIf the capacitor failure is due to failure, replace 500 V and 1.5uF capacitor, which is normal recovery.