Carton packing.If the number is large,can be reinforced with wooden bar or wooden box packing.
Shanghai & Ningbo
1 - 10
To be negotiated
RY-YB Series anti static eliminator bar for printing machine
MAX 50 MA
The electrostatic bar is the high voltage (7KV) generated by the static eliminator to the discharge needle, the formation of a strong electric field, the discharge pin to 50Hz-60HZ frequency alternately for the positive voltage and negative voltage, the discharge pin and the ground between the strong Halo electric field, the air molecules are ionized and the discharge needle tip alternately produces positive and negative ions. When any static electricity is passed from the electric field, it is neutralized with the corresponding charged ions with opposite charges. On the other hand, if the surface is negative, To neutralize it. To achieve the elimination of static electricity. In the discharge needle on both sides of the interval 3-4cm open a row of holes, access to compressed air, blowing the wind also has the effect of static and static, to expand the scope of treatment, but also has the effect of dust (compressed air to be filtered , To avoid secondary pollution).
Purpose: It is equipped with static eliminator to eliminate static electricity carried on the surface of products in industry.
Function: The electrostatic rod is a high voltage (7KV) produced by the electrostatic eliminator, which is induced to the discharge needle to form a strong electric field. The discharge needle alternates positive and negative voltage at 50Hz-60HZ frequency. A strong corona electric field is generated between the discharge needle and the earth electrode. The air molecules are ionized. The tip of the discharge needle alternately generates positive and negative ions. When any electrostatic body passes through the electric field, it will correspond to the corresponding band. On the contrary, if the surface is negative potential, the positive ions neutralize it to eliminate static electricity.
A row of small holes were opened at a distance of 3-4 cm between the two sides of the discharge needle, which can be connected to compressed air. The blowing air also has the effect of neutralizing static electricity, expanding the treatment range, and also has the effect of dust removal (compressed air needs to be filtered to avoid secondary pollution). Product characteristics:
Quick elimination of static electricity, stable performance; in addition to a wide range of static electricity, static elimination rod length can be customized.
1.The power supply for eliminating devices is 220 AC per hour. 380 V are strictly prohibited. Wiring shall be used when used end reliably with machine metal body and ground connection otherwise easy damage eliminator.
2.The grounding end of discharge rod must be grounded reliably and electro-acupuncture must be perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
3.When machine works, operator must not contact or close to high voltage output end-point electro acupuncture.
4.High voltage output lines shall be separated from ground lines and cannot be near any metal.
5.When cleaning maintenance, you must cut off power.
6.Discharge body and fixed bracket should be often cleaned with gasoline.
7.During transportation storage and use no two leaching or contacting corrosive objects shall be
8.In use, if sparks are detected or no spark output is found, typically 630 VIf the capacitor failure is due to failure, replace 500 V and 1.5uF capacitor, which is normal recovery.