KLFW Series High-speed Side-open Metal FilmCorona Processing Frame
FEATURE
1. The main body of the fuselage is made of aluminium profiles and processed by precise numerical control
2. The main roll with a large diameter of
3.150mm is formed by static pressing of ceramic electrodes imported from Germany. It has a large processing surface and is suitable for high-speed processing of metal film/plastic film
4. It is suitable for turning over and opening of
5 ozone hood in places with limited vertical height to discharge stimulating ozone gas during treatment;
6. It supports the opening and protecting function; and supports the function of no material shutdown.
Power
4-15 KW Corona Roller φ150mm
Treating size
Single side
Treating Speed
50-200m/min
Treating Width
300-2000mm
Main material
Aluminum Profile
Discharge electrode
Ceramic electrode
Optional
1. Ozone exhaust aluminum foil flexible hose 2. Centrifugal fan
Treating Material
Such as PE PP PS PETP PA PVCplastic film and aluminum-platedsteel Laser film . Aluminum foilmetallic film
Main Features
1) Airframe adopt the aluminum profile and precision numerical control process.
2) Adopt German imports, special static pressure molding ceramic metal film electrode.
3) Both sides of the pneumatic synchronization open,easy to wear film.
4) No material will stop the machine.
5) Can be equipped with ozone device,expel from the treatment of pungent ozone gas,to protect the respiratory tract.
6) open the protection device.
Company Information
FAQ
1.The power supply for eliminating devices is 220 AC per hour. 380 V are strictly prohibited. Wiring shall be used when used end reliably with machine metal body and ground connection otherwise easy damage eliminator.
2.The grounding end of discharge rod must be grounded reliably and electro-acupuncture must be perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
3.When machine works, operator must not contact or close to high voltage output end-point electro acupuncture.
4.High voltage output lines shall be separated from ground lines and cannot be near any metal.
5.When cleaning maintenance, you must cut off power.
6.Discharge body and fixed bracket should be often cleaned with gasoline.
7.During transportation storage and use no two leaching or contacting corrosive objects shall be
allowed.
8.In use, if sparks are detected or no spark output is found, typically 630 VIf the capacitor failure is due to failure, replace 500 V and 1.5uF capacitor, which is normal recovery.