Online support, Engineers available to service machinery overseas
Place of Origin:
corona treater station
50 Set/Sets per Week corona
Packaging & Delivery
Carton packing.If the number is large,can be reinforced with wooden bar or wooden box packing.
Shanghai & Ningbo
Corona treating machine for Plastic PE surface corona treater station
PTD SeriesClose-type Corona Discharge Frame
1. Closed structure, effective isolation of dust, safety and hygiene
2. treatment width can be adjusted according to actual needs;
3. Pneumatic device can be added to open easily, easy to penetrate film.
4. Ozone exhaust hood can be added to discharge ozone gas which is irritating to respiratory tract during treatment.
1. Closed all-metal fuselage
2. Regular width adjustable electrode cutter
3, plexiglass perspective window;
4. Middle 46m high-pressure rubber roller
5. Material/film breaking shutdown device;
1. Pneumatic opening device 2. Ozone exhaust hood
Occasion of application
Used for surface treatment of various plastic films, suitable for printing, compounding, blowing, coating, gluing, coating, casting and other industries. Speed < 50M/min
Such as PE PP PS PETP PA PVCplastic film
1.The power supply for eliminating devices is 220 AC per hour. 380 V are strictly prohibited. Wiring shall be used when used end reliably with machine metal body and ground connection otherwise easy damage eliminator.
2.The grounding end of discharge rod must be grounded reliably and electro-acupuncture must be perpendicular to electrostatic objects.The closer distance is, the better electrostatic effect is.
3.When machine works, operator must not contact or close to high voltage output end-point electro acupuncture.
4.High voltage output lines shall be separated from ground lines and cannot be near any metal.
5.When cleaning maintenance, you must cut off power.
6.Discharge body and fixed bracket should be often cleaned with gasoline.
7.During transportation storage and use no two leaching or contacting corrosive objects shall be
8.In use, if sparks are detected or no spark output is found, typically 630 VIf the capacitor failure is due to failure, replace 500 V and 1.5uF capacitor, which is normal recovery.